BCQWH - ZIP GRIP SUPER GLUE 100
- MSDS: BCQWH
- Manufacturer: DEVCON CORP
- Product Name: ZIP GRIP SUPER GLUE 100
- National Stock Number: 8040-00N008713
Product Identification
Product ID:ZIP GRIP SUPER GLUE 100
MSDS Date:01/01/1987
FSC:8040
NIIN:00N008713
MSDS Number: BCQWH
Responsible Party
Emergency Phone: 617-777-1100
Cage: 16059
Contractor
Telephone: 1-508-777-1100
Cage: 16059
Ingredients
ETHYL-2-CYANOACRYLATE (CAS# 708-85-0) (25-90%)
DIMETHACRYLATE ESTER (CAS# 109-16-0) (10-75%)
CAS: 109-16-0
RTECS: OZ4100000
METHYL 2-CYANOACRYLATE
CAS: 137-05-3
RTECS: AS7000000
Fraction By Weight: 0-70%
OSHA PEL 2 PPM/4 STEL
ACGIH TLV: 2 PPM/4 STEL; 9192
Hazards
Effects of Overexposure:EYE:BONDS VERY RAPIDLY,LACHRYMATOR,TEARING,EYE
& UPPER REST TRACT IRRIT.SKIN:BONDS VERY(SEE SUPP DAT
First Aid
First Aid:EYES:FLUSH IMMED W/PLENTY OF H*2O FOR @ LEAST 15 MIN.DONT
ATTEMPT TO FORCE LIDS OPEN.GET MED ATTN.SKIN:SOAK IMMED IN WARM
H*2O.REMOVE CURED ADHESIVE W/HOT SOAPY H*2O.INHAL:REMOVE TO FRESH
AIR.INGEST:I MMEDIATE BONDING OF SKIN/MOUTH.GET MED ATTN.
Fire Fighting
Flash Point:167F (75C), SCC
Extinguishing Media:CO*2,H*2O FOG,DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:CLOTHS USED TO WIPE UP SPILLS MAY CAUSE
RAPID POLYMERIZATION,POSS AUTO-IGNITION.SEE SPILL PROC SECT.
Accidental Release
Spill Release Procedures:SMALL SPILL:WIPE UP W/CLOTH.IMMED SOAK CLOTH
W/H*2O TO POLYMERIZE ADHESIVE.CAUTION:CLOTH CONTAINING ADHESIVE MAY
UNDERGO AUTO-IGNITION IF NOT SOAKED W/H*2O.LGE SPILL:FLOOD AREA
W/H*2O.WHEN CURED,REMOV E CURED FILM W/SCRAPER.WEAR NIOSH/ (SEEOTHR
PREC)
Handling
Handling and Storage Precautions:STORE IN COOL,DRY PLACE.KEEP AWAY FROM
HEAT/OPEN FLAMES.USE W/ADEQUATE VENT.AVOID SKIN,EYE/CLOTHING
CONTACT.READ INSTRUCTIONS CAREFULLY.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. HAZ POLYM CONDTN TO
AVOID:IN RAPID POLYMERIZATION W/UNCONTRL RISE IN TEMP,BUILDUP OF
PRESS IN CLSD CNTNR.SPILL PROC:MSHA APPRVD RESPIRATOR/SCBA & PROT
CLOTHING.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST TO KEEP VAPORS IN WORK AREA BELOW TLV LIMITS.
Protective Gloves:POLYETHYLENE
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:DO NOT USE RUBBER OR CLOTH GLOVES.
Supplemental Safety and Health
BOILING PT @ 3 MM HG. PH (5 WT % IN H*2O)=7. OVEREXP
EFTS:RAPIDLY.INHAL:MUCOUS MEMBRANE & UPPER REST TRACT
IRRIT.INGEST:IMMED BONDING OF SKIN/MOUTH. DOP:OCTOBER 1985.
Chemical Properties
Boiling Pt:B.P. Text:140F (60C)
Vapor Pres:0.3
Vapor Density:> 1
Spec Gravity:1.05
Solubility in Water:POLYMERIZES
Appearance and Odor:TRANSPARENT LIQUID;PUNGENT ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
H*2O,ALKALINE MATERIALS.
Stability Condition to Avoid:HIGH HUMIDITY,HIGH TEMP,ALKALINE
MATERIALS,H*2O.
Hazardous Decomposition Products:CO,CO*2,OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:H*2O,ALKALINE MATL/PEROXIDE CONTAM
CAN RESULT(SEE OTHR PREC)
Disposal
Waste Disposal Methods:INCINERATE, OR SOLID ADHESIVE CAN BE LANDFILLED
IN ACCORDANCE WITH ALL APPLICABLE FEDERAL,STATE & LOCAL
ENVIRONMENTAL REGULATIONS.DO NOT POUR DOWN THE DRAIN.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.